Sony SDM-S75DB Quick Setup Manual page 7

Symptom
If "OUT OF
RANGE" appears on
the screen,
If you are using
Windows and
replaced an old
display with this
display,
If using a Macintosh
system,
Check these items
x Problem caused by a computer or other equipment
connected, and not caused by the display
• Check that the video frequency range is within that specified
for the display. If you replaced an old display with this
display, reconnect the old display and adjust the computer's
graphics board within the following ranges:
Horizontal frequency: 28–80 kHz (analog RGB), 28–64 kHz
(digital RGB)
Vertical frequency: 48–75 Hz (analog RGB), 60 Hz (digital
RGB)
Resolution: 1280 × 1024 or less
• If you replaced an old display with this display, reconnect the
old display and do the following. Select "SONY" from the
"Manufacturers" list and select the desired model name from
the "Models" list in the Windows device selection screen. If
the model name of this display does not appear in the
"Models" list, try "Plug & Play."
• When connecting a Macintosh computer, use an adapter (not
supplied) if necessary. Connect the adapter to the computer
before connecting the video signal cable.
US
7
(US)