Related Manuals for AQUATECH PondMax Ultra Series
Summary of Contents for AQUATECH PondMax Ultra Series
- Page 1 – ulTra SErIES – PM1600SP Solar PuMP INSTruCTIoN MaNual Manufactured for: PO Box 648, Maddington, WA, 6989 Telephone: 1300 55 22 02 Email: info@aquatecequipment.com www.aquatecequipment.com Web: www.aquatecequipment.com...
- Page 2 CAUTIONS Night Mode: Press the “Mode” button to “Battery powered”, the second indicator light • Any altering of the product itself or changing will blink, the pump will run for 2 hours only of the components is forbidden. using battery power. • Do not connect the pump to any AC The default “battery powered” cycle time is – ulTra SErIES – voltage power, it is intended ONLY for DC 24hours. The pump will turn on automatically Voltage power. PM1600SP Solar PuMP same time the next day. • Operate in freshwater only Press the “Cycle” button if you wish the (never above 35 pump to operate for 2 hours once only, push • Do not drop or impact the solar panel. PM1600SP “cycle” button and the second indicator light • Do not let the pump run dry. SOLAr MODULe 16W (2x 8W SOLAr PANeL) will illuminate. Adjustable Flow Control: water flow is PUMP (VOLTAge) 12 - 18V DC BrUShLeSS PUMP...
- Page 3 MAINTENANCE Impellor Cover Solar Panel: The panel should be cleaned periodically with a soft tissue. regular cleaning of the panel 2. Impellor is advised to maintain optimum conversion of the sun’s energy into direct current. 3. Pump Base (Sliding) Pump: lf, after a period of time, the pump starts to lose power or stops working check for the build up of sediment, scale or dirt in the filter. remove the pump cover and the impeller cover. Clean them 4. Pump Motor Body and the filter with fresh water. 5. Top Of Pump Cover 6. Bottom Of Pump Cover 7. Filter Sponge 8. Fountain Nozzle x2 9. Battery housing 10. 8 Watt Solar Panel x2 Battery: If the pump stops working after it has been used for about over 12-18 months, maybe the battery is beyond its life span. Open the control housing to change a new battery. Lead–Acid 12V-4Ah 1. housing 2. Lead-Acid Battery 3. Circuit Board 4. Control housing Panel 5. Screw...
- Page 4 TROUBLE SHOOTING IMPORTANT SAFEGUARDS LIMITED WARRANTY • Pump does not operate even though the To guard against injury, basic safety precautions • Warranty covers only appliance defects and solar module is in full sunlight. should be observed including, but not limited to faulty material and workmanship within a 1 the following; year period. Check: No connection to the solar module - check connection to the solar module; Check • The pump should only be used in clean water. • Faults arising due to; accidents, misuse, connection to the DC pump, LeD light. Do not use the pump in any solvent or liquid not following manufacturer’s guidelines/ that is flammable. instructions will not be covered. Check: Impeller is blocked – To clean the pump, remove the cover as above. • Do not operate the pump without water at any • The impellor set is a consumable item and is time, permanent damage may occur. therefore not covered under warranty. Use a small brush or stream of water to remove any debris. • Do not operate the pump if the pump, or any • Batteries are replaceable parts and are not of the components of the pump such as the covered by warranty.
Need help?
Do you have a question about the PondMax Ultra Series and is the answer not in the manual?
Questions and answers