Advertisement
Attention if you stay pressed on the bell button, a long beep will be emitted and your interface
will not be programmed.
Ne maintenez pas appuyé le bouton de la sonnette sous peine d'effacer la mémoire pour ce
numéro. (Bip long)
7 : Return to your interface to press on again the button GT PROG so that your interface gets out of
the programming mode.
8 : Repeat points 5 to 7 for the other interfaces.
9 : To quit programming for panel, push twice on key «X» on keypad to return to the main menu (the
LED « IN USE » turns off). Scroll until QUITTER and push the bell button
now recognized on your installation.
10 : Go to the paragraph: fast activation of GTTLIIP.
2.4 Fast activation of GTTLIIP :
After checking the connections, switch on all the items of the installation. GTTLIIP connects via a
server. After 30s, GTTLIIP will be registred on the server, the state led will blink green/orange every
seconds. Your interface is operational.
Activate your Smartphone application. As soon as your Smartphone will be registred on the server,
you can use your system.
3 – Smartphones settings:
It is very easy and convenient to register Smartphone by using the barcodes delivered with GTTLIIP.
Check if the application 'Barcode Reader' is available on the Smartphone. If not, it is necessary to
install one (ie Barcode Scanner):
1- Install application 'AiphoneGT' .
a. Read the Barcode available on the back of GTTLIIP or on the manual. Smartphone will
connect directly on the corresponding store depending of the Smartphone (Androïd or
IOS).
b. If the Barcode does not work, go to the relevant store corresponding to your Smartphone
and search the application 'AiphoneGT'
10
. Your interface is
06.09.18 – V1.0
Advertisement
