Page 2
Replacement products or components thereof should be ordered direct from Factory Furniture Ltd. Copyright The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd. General Specifications Lounger length 2025mm | width 800mm | height 775mm Metric Imperial length 6’...
Page 3
finishes and polyester powder coat colours etc. In any event where either, additional orders are required, or spares and replacements are required please contact Factory Furniture Ltd. Using the part numbers given above as reference should help us to process your enquiry more efficiently.
Page 4
Ensure that stainless steel is protected during site cutting of stone – contamination from disc cutters will produce corrosion on stainless steel components. M10 S/S cap nut Ground level M10 x 150mm threaded rod resin anchor 300x300x700mm C20 concrete base (recommended) TORD LOUNGER installation...