Page 2
Manufacture Anchored to ground via 3 no. M10 x 75mm sleeve • Factory Furniture manufactured components. Products anchor per bench. are assembled in Factory workshops, checked and dispatched ready for installation. Replacement products Please note that when a powder-coat is applied to a...
Page 3
In the event of serious damage to any component, cause a brown staining on the bases. This may be replacements should be ordered from Factory Furniture removed with a light solution of household bleach and Ltd. Should further assistance be required (or if the water.
Page 4
- install as complete unit. Remove bench; drill holes - Ø12mm x 80mm deep (or as manufacturer’s recommendations). Sonobe Bench Clear debris from holes. Install suitable foundation pads (see illustrations) Reposition bench unit and fix to foundation pad each with top face at ground level.