Advertisement
LCD DISPLAY KEY
A. Laser pointer "on" indicator
B. High temperature alert indicator
""""
C. Low temperature alert indicator
D. Data hold indicator
E. Measurement result
F. Emissivity indicator
""""
INSTRUCTIONS FOR USE
1. Remove the battery cover (8) and install battery, if needed (FIG. B). Pull the trigger and check
LCD reading (FIG C) to confi rm operation. Reading will display for 7 seconds after releasing
the trigger.
2. Aim the thermometer toward the object to be measured.
3. Use the laser pointer for accuracy.
4. Pull the trigger and hold.
5. Slowly move the thermometer back and forth, then up and down, to locate the hottest spot
on the object.
MAINTENANCE
• Lens cleaning – Use compressed air to remove loose particles. Gently wipe away any remain-
ing debris with a damp cotton cloth. Do not use solvents to clean lens.
• Case cleaning – Use a damp cloth and mild soap to clean case.
• Remove battery from thermometer when not in use for extended periods.
To order parts and supplies: 800.345.1178 >> eastwood.com
FIG. C
A
E
F
B
C
D
5
Advertisement
