Safety Precautions For Power Supply Unit - AT&T RADIANT Core User Manual

desktop or notebook computer has an equipment grounding conductor and
a grounding plug. The plug must be plugged into an appropriate outlet that
is properly installed and grounded in accordance with all local codes and
ordinances.

Safety precautions for power supply unit

Use the correct external power source
A product should be operated only from the type of power source indicated
on the electrical ratings label. If you are not sure of the type of power source
required, consult your authorized service provider or local power company.
For a product that operates from battery power or other sources, refer to the
operating instructions that are included with the product.
This product should be operated only with the following designated power
supply unit(s).
Travel charger: Input: 100-240V, 50/60Hz, 0.15A. Output: 5V, 1000mA
Handle battery packs carefully
This product contains a Lithium-ion battery. There is a risk of fire and burns if
the battery pack is handled improperly. Do not attempt to open or service
the battery pack. Do not disassemble, crush, puncture, short circuit the exter-
nal contacts or circuits, dispose of in fire or water, or expose a battery pack
to temperatures higher than 140°F (60°C). The operating temperature for the
phone is 14°F (-10°C) to 113°F (45°C).
Warning: Danger of explosion if battery is incorrectly replaced.
To reduce risk of fire or burns, do not disassemble, crush, puncture, short
circuit the external contacts, expose to temperature above 140°F (60°C), or
dispose of in fire or water. Replace only with specified batteries. Recycle or dis-
pose of used batteries according to the local regulations or reference guide
supplied with your product.
175