Safety Precautions For Power Supply Unit - AT&T RADIANT Max User Manual

Safety precautions for power supply unit

Use the correct external power source
A product should be operated only from the type of power source indicated
on the electrical ratings label . If you are not sure of the type of power source
required, consult your authorized service provider or local power company .
For a product that operates from battery power or other sources, refer to the
operating instructions that are included with the product .
This product should be operated only with the following designated power
supply unit(s) .
Travel charger: Input: 100-240V, 50/60Hz, 0 .5A . Output: 9V, 2A
Battery must be used with caution
This product contains a lithium polymer battery . There is a risk of fire and
burns if the battery pack is handled improperly . Do not attempt to open or
service the battery pack . Do not disassemble, crush, puncture, short circuit
the external contacts or circuits, dispose of in fire or water, or expose a battery
pack to temperatures higher than 140°F (60°C) . The operating temperature for
the phone is 14°F (-10°C) to 113°F (45°C) . The charging temperature for phone
is 32°F (0°C) to 113°F (45°C) .
Warning: Battery is non-removable . Do not attempt to remove the battery for
danger of explosion .
To reduce risk of fire or burns, do not disassemble crush, puncture, short circuit
the external contacts expose to temperature above 140°F (60°C), or dispose
of in fire or water . Do not attempt to replace the non-removable battery . The
phone and battery as a unibody device must be disposed of in accordance
with locally applicable environmental regulations or guides supplied with
your product .
208