Table of Contents
Advertisement
Quick Links
FM-ONE
Flash memory MCU PROGRAMMER
For the Operation Procedures
IMPORTANT ..................................................................................... 1
ON-BOARD PROGRAMMER ........................................................... 2
FM-ONE FUTURES ................................................ 2
SPECIFICATIONS .................................................... 2
【Package Style】 ................................................................. 2
【Product and contained accessories】................................. 3
【The provided CD includes】 ............................................... 3
【Brief specifications of the main body】 ............................... 4
【Specifications of FM－ONE Project File Maker】 ............... 4
【Parts names】 .................................................................... 4
【Side of body】 .................................................................... 4
Battery Holder Guidance ........................................................... 5
About some changes on display for upgrade ............................ 6
Preparation ................................................................................ 7
Installation of
Target board ............................................................. 8
Connector and Cable ................................................ 8
CONNECTION IMAGE ............................................................ 8
Insertion of CF .......................................................... 8
Order of Power Supply .............................................. 8
Fundamental Operation Method .............................................. 8
What is PROJECT FILE? ............................................... 8
Fundamental Write-in Method .................................. 9
A1: Save/Load .............................................................. 11
A2: Program .................................................................. 14
A3: Log .......................................................................... 15
With the switch on
B : Write switch (OK) ................................................... 18
Specific MCU ............................................................................ 19
Before using RL78 family MCU ................................................ 22
Troubleshooting ........................................................................ 23
Items to be confirmed at errors ............................... 23
Correspondence MCU .............................................................. 26
Version upgrade method ......................................................... 26
Optional items ......................................................................... 26
Includes .................................................................................. 27
.............................. 8
【Offline】 ...................... 18
.......................................................... 24
............................................... 25
........................................................... 25
CONTENTS◆
............. 7
【Online】 ............ 10
...... 19
...................... 19
Hokuto Denshi Co; ltd
Advertisement
Table of Contents
Related Manuals for Hokuto Electronic FM-ONE
Summary of Contents for Hokuto Electronic FM-ONE
-
Page 1: Table Of Contents
For the Operation Procedures Flash memory MCU PROGRAMMER CONTENTS◆ IMPORTANT ..................1 ON-BOARD PROGRAMMER ............2 FM-ONE FUTURES ..........2 SPECIFICATIONS ............ 2 【Package Style】 ..............2 【Product and contained accessories】......... 3 【The provided CD includes】 ..........3 【Brief specifications of the main body】 ....... 4 【Specifications of FM－ONE Project File Maker】... -
Page 2: Important
FM-ONE is made up of a programming writer which rewrites programs to a Flash ROM built-in microcomputer made by Renesas Electronics Corp. The FM-ONE is not to be used for any other purpose other than what is specified in this manual. -
Page 3: On-Board Programmer
FM-ONE FUTURES FM-ONE is characterized by an easy handling of the user programs with CF (compact flash). We have made efforts in improving for convinience. For example, those functions are left unchanged that have been well received with the existing on-board programmer FLASH2 and FLASH MATE5V1. -
Page 4: Product And Contained Accessories
【Product and contained accessories】 On-board programmer FM-ONE body ................Software (attached CD) ........................Compact flash ............................. AC adapter ..............................Connection cable to target board (20P Flat cable 30cm) ....one User’s manual: one operation edition and one material edition ＊... -
Page 5: Brief Specifications Of The Main Body
260g excluding batteries （ ） 【Specifications of FM－ONE Project File Maker】 FM-ONE Project File Maker Attached application: Windows2000,XP,Vista,7,8.1 amd 10 Operation environment: (Online writing is not available on Vista and 7.) Japanese environment *While using this application, don’t use other applications. -
Page 6: Battery Holder Guidance
(-) of the battery holder could come into contact with positive terminal (+) inside of the flexible label as shown in the diagram below. It causes electrical short-circuit. Please do not use the batteries described above. Electrical short-circuit may cause smoke and fire. FM-ONE HOKUTO DENSHI CO;LTD;... -
Page 7: About Some Changes On Display For Upgrade
1-1 Old version 1-2 New version ● On stand-by 【In Online idling】 ・ “USB/DC” is shown on the screen when FM-ONE is connected to the PC with a USB cable.(2-2 A) Old version New version ● On stand-by 【In Offline idling】... -
Page 8: Preparation
Preparation FM-ONE Project File Maker Installation of ＜ ＞ Procedure of Installation ① Set the attached CD into the CD drive of PC, start up Explorer, and double click on the setup.exe from among the files in the CD drive. -
Page 9: Target Board
Insert CF with its back face upward. slot is on the CF side. Hold the CF card with the CF inserted into the FM-ONE body is recognized as a USB wider slot to the right against the FM-ONE and the storage by PC narrower one to the left, and the back face will be upward. -
Page 10: Order Of Power Supply
Fundamental Operation Method What is PROJECT FILE? Besides selection of files or parameters, attached application FM-ONE Project File Maker produces the following five different files. The number of files and folders that FM-ONE can detect is Project files to be produced up to 10. -
Page 11: Fundamental Write-In Method
When user programs prepared with the MOT/HEX file format are to be used, the above five files must be prepared as a project using FM-ONE Project File Maker. Writing is not possible by putting MOT/HEX file alone in the CF. -
Page 12: With Fm-One Project File Maker 【Online
The operation of the FM-ONE Project File Maker is described. Project File Maker cable Connection to the FM-ONE body or the target board is not always necessary. Connect the system when necessary as the diagram right shows. Target board From PC to CF... -
Page 13: A1: Save/Load
A1: Save/Load SAVED Select a file as well as a parameter as a project file to be FM-ONE Project File Maker As mentioned on the previous page, first of all, start to display a detailed setup screen. ① Selection of User Program Select the prepared MOT/HEX file. -
Page 14: Operating Tab For R8C, M16C, M32R, 740 Families
SCK signal must be connected to the Target Interface #19. ▼ Setting value: NONE (No need when unnecessary) 10K, 25K, 50k, 100K, 500K, 1M, 2M ★3 MCU of R8C/32A, 33A, and 35A(354A,355A,356A) can’t be used. FM-ONE HOKUTO DENSHI CO;LTD;... -
Page 15: Operating Tab For V850, 78K0, 78K0R, Rl78 Families
▼ Setting value: NONE (No need when unnecessary) 10K, 25K, 50k, 100K, 500K, 1M, 2M ★6 Security Settings are cleared by Chip Erase except for “Disable Chip Erase” and “Disable Boot Block Cluster Reprogramming”. In FM-ONE, Chip Erase carried out automatically. Note: About programming onto V850・78K0・78K0R series An option board which fit each series is necessary. -
Page 16: A2: Program
From PC to CF To program, be sure to connect the main Flash on-chip microcomputer MOT/HEX FM-ONE body, the USB cable and the target board as From CF to on-chip FlashROM in the diagram on the right diagram. Online operation There are actually two operational procedures as follows: ... -
Page 17: A3: Log
ID file that R8C compiler makes. name of an ID file Please specify a name of an ID file that was made by compiler and press "Open" button to activate ID settings. FM-ONE HOKUTO DENSHI CO;LTD; 株式会社... - Page 18 “Checksum” has been selected, “Byte” is automatically selected as verify. Please refer to " " and " " for detail ※ About programming onto R8C・M16C・M32R series Purchase of expendable supplies about "20-14pin R8C single wire fastest". FM-ONE HOKUTO DENSHI CO;LTD; 株式会社...
- Page 19 Choose hardware tab and click "DeviceManager" Please find "HOKUTO CompactFlash I/F USB Device". It is under "disk drive". Click "Policy" tab and choose down side of radio button and click "OK" button. That is all to setup. FM-ONE HOKUTO DENSHI CO;LTD; 株式会社...
-
Page 20: Fm-One
LCD of the FM－ONE body for about Self test OK three seconds. version xxxxxxxx ③ If self-test is done properly, one of the project files saved in the CF will be immediately displayed. FM-ONE System 2.4V Write Folder Cancel Date 05/01/01... -
Page 21: Specific Mcu
If CANCEL button is pushed three times consecutively on the Project selection screen, functions other than Write and Cancel are blocked. A key symbol before a letter tells that switch operation is blocked. FM-ONE System 2.4V To unlock, push CANCEL button three times. -
Page 22: About Programming Onto R8C・M16C・M32R・R32C Series
Please refer to MCU hardware manual for examples of connection Serial Programmer and MCU. Please refer to “E8a Emulator user’s manual” for this pin assign. Please use programming tools with appropriate version of control software. Please refer to the instruction manual for each connection on the target board. FM-ONE HOKUTO DENSHI CO;LTD; 株式会社... - Page 23 Please use programming tools with appropriate version of control software. Please refer to the instruction manual for each connection on the target board. how to connect Attached cable Conversion unit FM-ONE 10pins or 14pins cable Target board 10-14P conversion connector （TOE8）...
-
Page 24: Before Using Rl78 Family Mcu
Please refer to “E1 emulator user’s manual” or “E20 user’s manual” for this pin assignament for each MCU. （conversion unit only） how to connect Attached cable FM-ONE Target board Conversion unit how to connect （with 16pin or 14pin straight cable）... -
Page 25: Troubleshooting
While operating, there may be a loose connection or breaking, so confirm if the cable is properly connected. Also, when the FM-ONE body is turned OFF, or some trouble occurs while operation in MCU, make sure that power is properly supplied to the body and the board. -
Page 26: Timing Chart
As many as 10 file folders in the CF can be perceived by FM-ONE. If more than 10 file folders are in the CF root, FM-ONE will detected 10 files voluntarily and display them on LCD screen. The order of display cannot be designated. -
Page 27: Errors While Writing
Transmit data by USB connection, or save data by File not found over-the-counter CF reader and then insert file into FM-ONE. Please set the switch (for farmware update) to Self test NG It is reported that the result of selftest is NG. -
Page 28: Correspondence Mcu
Windows2000, Windows XP(Professional/Home Edition) , Windows Vista, Windows Version upgrade 7, Windows8.1 and Windows10 Japanese environment. ※ Contact us to use FM-ONE in another environment. software ※Price is subject to change. For the latest information, visit our website. Optional items The followings are the optional items for FM-ONE. -
Page 29: Includes
※Applicable for both FLASHMATE5V1 and FLASH2 \6,000 Please purchase version up software. CF card "CFU-IV128" \5,000 Guarantees operation when using FM-ONE. （made by I-O Data Device, Inc.） ※Price is subject to change. For the latest information, visit our website. FM-ONE User’s Manual ©...
Need help?
Do you have a question about the FM-ONE and is the answer not in the manual?
Questions and answers