Service Tab - Sprint Unbundled Dark Fiber Product Manual

Unbundled Dark Fiber
Loop Orders (Continued)
Table 5 provides the appropriate location information by Route Type.
Table 5 – Route Type Information
Route Type
2) Central Office to an end-user
premises located FPP (loop)
3) Central Office to remote (feeder
subloop)
4) Remote to remote (distribution
subloop)
5) Remote to an end-user premises
located FPP (distribution subloop)

Service Tab

In IRES, entries are required in the ACTL and APOT fields on the Service tab when two CLLI
codes are required (Route Types 3 and 4). When one CLLI code and one address are required
(Route Types 2 and 5), the only field requiring an entry is the ACTL field.
In addition, entries are required in the NC, NCI and SECNCI fields on the Service tab. Table 6
provides the codes for loop Route Types 2, 3, 4 and 5.
2) Central Office to an end-user premises located FPP
(loop)
3) Central Office to remote (feeder subloop)
4) Remote to remote (distribution subloop)
5) Remote to an end-user premises located FPP
(distribution subloop)
Figure 8 illustrates the required entries described above. The remaining fields highlighted on the
Service tab should be completed with standard entries.
10/02 Version 1
POI CLLI at the CO (CLLI Z)
POI CLLI at the CO (CLLI Z)
POI CLLI at the OSP (CLLI Z)
POI CLLI at the OSP (CLLI Z)
Table 6 - Codes
Route Type
Copyright 2002 Sprint Communications Company
Location Z
NC
LX-- 01QBF.LLX
LX-- 01QBF.LLX
LX-- 01QEF.X
LX-- 01QEF.X
Location A
End-user address
POI CLLI at the OSP
(CLLI A)
POI CLLI at the OSP
(CLLI A)
End-user address
NCI SECNCI
01FCF.X
01QEF.X
01QEF.X
01FCF.X
10