Related Manuals for Zimmer SBZ series
Summary of Contents for Zimmer SBZ series
- Page 1 INSTALLATION AND OPERATING INSTRUCTIONS Handling technology SB/SBZ series Swivel jaws THE KNOW-HOW FACTORY...
- Page 2 Zimmer GmbH shall accept no liability for any damage caused by improper use The SB/SBZ series of swivel jaws are intended to be used exclusively in pairs for picking up workpieces and for swiveling and positioning them according to the technical design. The swivel jaws may be used only as intended and in accordance with the technical parameters.
- Page 3 The SB series is driven by a double-acting pneumatic rotary cylinder. The force is transmitted to the output shaft by a toothed belt. The SBZ series is driven by a double-acting linear pneumatic cylinder.
- Page 4 [°C] 5/80 Cylinder volume per cycle [cm³] Weight (pair) [kg] Protection class ** Please always compare the technical data with the corresponding tables on the Internet at www.zimmer-group.de! Swivel jaws of the SBZ series **) Size SB50-... SB74-... SB100-... SB150-...
- Page 5 Swivel jaws of the SB series are always installed on the front side of the drive. SBZ series Swivel jaws of the SBZ series can be installed on the front side as well as on an interior side surface of the drive. SB series...
- Page 6 INSTALLATION AND OPERATING INSTRUCTIONS: SB/SBZ series of swivel jaws 5.3 Energy supply The existing pneumatic connections are shown as A and B in the dimensional drawings of the product data sheets. Alternatively, potential connections are shown with A‘ and B‘.
- Page 7 INSTALLATION AND OPERATING INSTRUCTIONS: SB/SBZ series of swivel jaws 6.2 Adjusting the swivel angle – SBZ series The swivel angle is preset by the factory-installed flange Image : 90 ° Image :180 ° The swivel jaw is equipped with external limit stops , which allow the swivel angle to be ad- justed a maximum of +/- 3°...
- Page 8 An ideal setting is reached if a uniform swivel movement and an approach to the limit stops with exhaust air throttling is guaranteed. 7. Maintenance ► The swivel jaws of the SB/SBZ series operate maintenance-free for up to 10 million swiveling cycles. INFORMATION: The actual service life of the swivel jaws is dependent on many factors: •Drive with filtered compressed air, dry or lubricated...
- Page 9 8. Declaration of incorporation in terms of the EC Machinery Directive 2006/42/EC on Machinery (Annex II 1 B) In terms of the EU Machinery Directive 2006/42/EC (Annex II 1 B) Name and address of the manufacturer: Zimmer GmbH, Im Salmenkopf 5, 77866 Rheinau, Germany We hereby declare that the incomplete machines described below Product designation:...
- Page 10 INSTALLATION AND OPERATING INSTRUCTIONS: SB/SBZ series of swivel jaws 9. Your notes Zimmer GmbH Im Salmenkopf 5 77866 Rheinau, Germany Phone: +49 7844 9138-0 Fax: +49 7844 9138-80 www.zimmer-group.de ● ● ● ● ●...
- Page 11 INSTALLATION AND OPERATING INSTRUCTIONS: SB/SBZ series of swivel jaws Zimmer GmbH Im Salmenkopf 5 77866 Rheinau, Germany Phone: +49 7844 9138-0 Fax: +49 7844 9138-80 www.zimmer-group.de ● ● ● ● ●...
- Page 12 INSTALLATION AND OPERATING INSTRUCTIONS: SB/SBZ series of swivel jaws Zimmer GmbH Im Salmenkopf 5 77866 Rheinau, Germany Phone: +49 7844 9138-0 Fax: +49 7844 9138-80 www.zimmer-group.de ● ● ● ● ●...