Download Print this page

Remington HyperFlex XR1340G Quick Start Manual page 5

Hide thumbs Also See for HyperFlex XR1340G:

Advertisement

C HOW TO USE
, SHAVING
Note: This shaver is for cordless use only.
• Make sure your shaver is properly charged.
• Switch the shaver on.
• Stretch the skin with your free hand so the hairs stand upright
• Only apply light pressure on the shaving head while shaving (pressing too hard can
damage the heads and make them vulnerable to breakage).
• Use short, circular strokes.
, SHAVING WITH SHAVING GEL
• Follow the same instructions as dry shaving if using with gel.
F CAUTION: After use with shaving gel, please rinse the head and cutters under warm
water to clean away any excess gel and debris.
, TRIMMING
• Push the trimmer button to release the detail trimmer.
• Hold the trimmer at right angles to the skin.
• Place the trimmer at desired trim line for a quick, easy, professional trim.
• To retract and switch off the trimmer, push the trimmer down and lock into place.
E Tips for best results
• Use moderate to slow stroking movements. The use of short circular motions in stubborn
areas may obtain a closer shave, especially along the neck and chin line.
• DO NOT press hard against the skin in order to avoid damage to the rotary heads.
C CARE FOR YOUR SHAVER
Care for your appliance to ensure a long lasting performance. We recommend you clean your
appliance after each use. The easiest and the most hygienic way to clean the appliance is by
rinsing the appliance head after use with warm water.
, CLEANING
5

Advertisement

loading