Advertisement
C GETTING STARTED
For best shaving performance, it is recommended that you use your new shaver daily for
up to four weeks to allow time for your beard and skin to become accustomed to the new
shaving system.
, CHARGING STAND
• Rotate open the charge stand fully to stand firmly on a flat surface while charging. For
travel you can fold the stand around the shaver (see below).
, CHARGING YOUR SHAVER
• Ensure the appliance is turned off.
• Connect the charging stand to the adaptor and then to the mains.
• Place the shaver in the charging stand.
• Charge for at least 24 hours when using for the first time.
• Allow 4 hours for a full charge. The charging indicator light will indicate when the
shaver is fully charged.
, When charge is low, the top LED will illuminate a solid red light. When charging the
bottom LED will illuminate a solid green light. When fully charged both LED's will be off.
• To preserve the life of your batteries, let them run out every 6 months then recharge for
24 hours.
• The shaver automatically adjusts to a mains voltage between 100V and 240V.
O This appliance should be charged by approved safety isolating adaptors PA-0510K
with the output capacity of 5.0V dc; 1.0A.
4
Advertisement
