Table of Contents
Advertisement
Contacts Match
Dial any number saved in your Contacts by entering
the last four or five digits of the number.
To access Contacts Match:
1.
While in standby mode, select
> More... > Call Setup > Contacts Match
2.
Select
On
or
Off
.
Note
If there is more than one Contacts entry that
matches the last four or five digits, a list is displayed
that allows you to select a number to call.
Restricting Outgoing Voice Calls
Restrict your phone's outgoing calls according to one
of the following rules:
to allow outgoing calls to be made with no
Allow all
restrictions.
to allow outgoing calls to only those
Contacts Only
numbers saved in the Contacts list.
Main Menu > Settings
.
Using Voice Caller ID
Enabling the Bluetooth option (see "Voice Caller ID" on
page 122) on your phone allows you to receive a
Caller ID announcement when an incoming call is
detected by the Bluetooth device.
When an incoming caller has previously been saved to
your Contacts list, the caller's Contacts name will be
announced through your headset. If an incoming caller
is not currently in your Contacts, only the caller's phone
number will be announced through your headset.
Special# Only
to allow outgoing calls to only the
numbers set up in the special numbers list. (See
"Creating and Using Special Numbers" on page 58.)
1.
While in standby mode, select
.
2.
Select
Settings > More... > Restrict and Lock > Voice
3.
Enter your lock code.
4.
Select
Restrict > Outgoing Call
5.
Select
,
Allow all
Contacts Only
and press
Main Menu
.
.
, or
.
Special# Only
Section 2B. Settings
53
Advertisement
Table of Contents
