Message from CANbus
71
CANbus functions
8.3
Message from CANbus
The device supports the following CANbus functions according to the SAE J1939 250 kbit
29 bit identifier of address 00h (standard):
•
PGN 57344 Cab Message 1 - CM1 (Page 71)
8.3.1
PGN 57344 Cab Message 1 - CM1
SPN 1653-1655 Vehicle Limiting Speed Governor byte 5, bit 3-8
SPN 1656 Engine Automatic Start Enable Switch, byte 6, bit 7-8
Example:
0CE00003 8 FF FF FF FF 47 3F FF FF
Byte 5: 0x47=LowSpeed | 0x53=HighSpeed
Byte 6: 0x3F=Stop | 0x7F=Start
Translation of the original operating instructions • Engine controller MCflex • 08/05/2018 • 3.0 • GB
Need help?
Do you have a question about the MCflex and is the answer not in the manual?