Thor Kitchen HRH3001U Installation Manual And User's Manual page 9

5. Duct Pipe Sealing
Use duct sealing tape to connect duct pipe to the hood duct. Avoid reducing for the duct pipe size or it
will affect hood performance.
7
• We provide a 6 /
8
Recommended duct size for your range hood is shown below:
Model Number
01, 02, 04, 06, 06-BS series
05 series
6. Connect Power Cord to the range hood
•
Locate the power cord in your range hood package, connect the power cord to your range hood power outlet
(located on the top rear right of the range hood)
7. Installing Grease Tray and Filters
Grease tray is included in your range hood package, it helps to stabilize the filter and collect the grease
coming from the filter. Please follow procedures below for the installation of Grease Tray and Filters:
• Put the grease filter to the bottom end of the range hood;
• Remove the protective cover of the filter, and put the filter all the way to the end into the range hood
cavity (1);
• Lift the front of the filter (2);
• Locate the notch inside the front range hood cavity, put the filter into the notch (3) and lay down the
bottom part of the filter (4);
• Put the bottom of the filter into the notch provided by Grease Filter and make sure the filter is stable
and not falling off.
inches (in certain models 7
5
/ inches) duct size for your Thor Kitchen Range Hood.
8
Duct Size
7
6 / inches
8
5
7 / inches
8
8
Recommended Size for Duct Pipe
7"-8"
8"-9"