Thor Kitchen HRH3001U Installation Manual And User's Manual page 8

(2) Drywall Screw set (b) and (c) are used for securing range hood (mounting plate) to the wall.
• It's required that holding plate (mounting plate) needs to be anchored in studs – the wall alone will not
be strong enough to support range hood's weight. The center of a stud provides the best support for the
range hood. At least one Drywall Screw set needs to be mounted into stud. Use stud Finder to locate the
stud before mounting the drywall screw set to the wall.
(1) Short Screw Set Mounting (2) Drywall Screw Set Mounting
4. Short Screw Set Installation and Drywall Screw set installation
• Verify the mounting plate design. The side with 7 holes (including 4 small holes) if for the top side.
Holes in Middle line and bottom line are for short screw set mounting, connecting range hood to the
mounting plate;
• The 3 big holes on the top line are for Drywall Screw Set mounting, connecting mounting plate (range
hood) to the wall.
Mounting Plate Design Duct Pipe Sealing
7