Table of Contents
Advertisement
5.3
Configuring access points
5.3.1
Single configuration
"All APs" configuration page
To open the "All APs" configuration page, select the "Wireless APs > APs > All" menu
command. With this page, you configure the access points individually. Note that a
configuration type can be used on more than one AP. For more detailed information, refer to
section "Multiple configuration (Page 58)".
Buttons
Note the following buttons on this configuration page:
● Copy to Defaults
To save the configuration of the AP type as a default value in the WBM, click the "Copy to
Default" button.
● Reset to Defaults
To replace the current settings of the AP type with the default values, click the "Reset to
Default" button.
● Add Wireless AP
To register an AP manually, click the "Add Wireless AP" button.
● Save
To store your settings, click the "Save" button.
SCALANCE WLC711
Getting Started, 04/2016, C79000-G8976-C269-07
Managing access points
5.3 Configuring access points
45
Advertisement
Table of Contents
