Lakeland Touchscreen Bean to Cup Instruction Booklet page 12

ASSEMBLING THE APPLIANCE
12
1. Place the grind basket into the main unit and then
turn it clockwise until you hear a click.
2. Place the filter into the grind basket, making sure that
the filter handle is located in the gap.
3. Replace the grind basket lid by pressing downwards
until you hear a click.
4. PLEASE NOTE: The water tube must be located inside
the water inlet.
5. Before first use, fill the coffee jug with fresh cold
water and run this through the appliance, following
the steps on the next page to thoroughly clean with
NO coffee beans or ground coffee present. Do this
three times.