Samsung RF4402d-D1A Installation Manual page 25

No. Name
10 Level
11 Hammer Drill
12 Concrete Drill Bit
13 Anchor Punch
14 Hammer
15 Vacuum Cleaner
16 Heating Gun
17 Cable Cutter
18 Crimping Tool
19 Wire Stripper
20 Nipper
21 Flush cutter
22 LAN Tool
23 Industrial Scissor
RF4402d Series Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Specification Purpose of use
Normal For horizontality and verticality
Normal Wall Type Drilling
0.55 in. (14 mm) For M10 Strong Anchor
M10 For M10 Strong Anchor
Normal Anchor fixing
Normal For removing dust during the drilling
work
122~572°F (50~300°C) Shrinking Feeder cable tube
0.24~1.26 in. (6~32 mm) Cable cutting
AWG14~AWG4 (1.5~16 mm 2 ) Pressure terminal for crimping
Apply cable thickness: Cable sheath for removal
1.5~6.2 in. (4~16 mm)
Basic Tool For cutting cable
Basic Tool For cutting cable tie
Basic Tool RJ45 Crimper
Basic Tool Cutting
Confidential
Chapter 1 Before Installation
10