Advertisement
Quick Links
Resolution Compatibles
PINPad
is a simple arming station that allows local
control of the security system. It is battery powered
and requires no installation tools. Many can be
installed throughout the home to provide convenient
system control.
Features
• Secure 4 digit disarming
• Small yet comfortable
• 5 year warranty
Enroll
by placing the panel into wireless enrollment
mode and then using the specific enrollment
instructions from your Honeywell panel's manual. The
PINPad will be enrolled exactly the same way as a
keyfob.
The default access code
access code, complete the following steps within four
seconds:
1. Enter the current 4-digit access code.
2. Press and hold the "1" and "3" buttons
simultaneously. After three seconds, the Red LED
will be lit.
3. Enter new 4-digit access code. After this happens,
the green LED will be lit.
Panel specific enrollment instructions
Lynx Touch 5100: First select "programming". Then
choose "keys" and select "add new".
System Programming
Key Type
4 Button
Serial Number
[Press Stay key to enroll]
Button Key 1 - Zn 49
Arm Away
Button Key 3 - Zn 51
Arm Stay
Use the panel installation guide to verify proper system setup.
RE252 PINPad
Honeywell® Compatible
is "1234". To change the
User
Master
Zone
49 (example)
Button Key 2 - Zn 50
Disarm
Button Key 4 - Zn 52
24 Hour Auxiliary
™
I
Advertisement
Related Manuals for Alula RE252 PINPad
Summary of Contents for Alula RE252 PINPad
- Page 1 RE252 PINPad ™ Honeywell® Compatible Resolution Compatibles PINPad is a simple arming station that allows local control of the security system. It is battery powered and requires no installation tools. Many can be installed throughout the home to provide convenient system control.
- Page 2 Lynx 5100 (Continued) PINPad Lynx Touch Lynx Touch Should be Button Button Key Loop Programmed to Away Button Key 1 Loop 3 ARM AWAY PIN Code Button Key 2 Loop 2 DISARM Stay Button Key 3 Loop 4 ARM STAY Stay + Away Button Key 4 Loop 1 24 HOUR AUX...
- Page 3 Install using the 3M VHB® tape on the back of the PINPad to adhere it to a wall. VHB Tape • See Pro Tips for recommendations about using 3M VHB tape. • Two #4 or #6 screws may be used instead of, Mounting Screw Holes or in addition to, the 3M VHB tape.
-
Page 4: Specifications
(1) L’appareil ne doit pas produire de brouillage, et Alula products will function with Honeywell systems. However, no (2) L’utilisateur de l’appareil doit accepter tout brouillage Alula product is produced by, endorsed by, or is officially associated radioélectrique subi, même si le brouillage est susceptible d’en with Honeywell.
Need help?
Do you have a question about the RE252 PINPad and is the answer not in the manual?
Questions and answers