Philips WelcomeEye Comfort DES9500VDP User Manual page 32

1: Audio settings
a b
a: Choice of ringtone during a call from intercom panel 1
b: Choice of ringtone during a call from intercom panel 2 (only if an additional intercom
panel has been confi gured)
c: Choice of ringtone during an intercom call (only if an additional monitor has been
confi gured)
d: Volume settings for the monitor ringtone
e: Volume settings for the monitor loudspeaker during communication.
2: Image settings
Image brightness, contrast and colour settings.
3: Confi guring the WelcomeEye system options
a
a: Activation of a second intercom panel (choose On if a second intercom panel is used).
b: Activation of the camera option (choose on if a camera is used).
c: Confi guration of the monitor(s). When the system has several monitors, you must
confi gure one of them as the Master and the others as Slave monitors. If the system only
has one monitor, choose Off .
d: Activation of video doorphone energy saving mode. When the energy saving mode is
activated (On), product power consumption is reduced. The intercom panel is placed on
standby, therefore the monitor no longer receives calls.
4. Monitor ringtone deactivation
This function turns off the monitor ringtone for a certain period (snooze, etc.). The monitor
LEDs will still fl ash to signal incoming calls.
a
a: activate (On) / deactivate (Off ) the monitor's ringtone.
b: Time when the ringtone will be deactivated.
c: Time when the ringtone will be reactivated.
GB10
c d
b c
b c
WelcomeEye Comfort / Compact / 09/17
e
d