BRoaDBanD ConnECtion
•
Physical Address - displays the physical address of the
network card used for the network.
•
MTU - specifies the largest packet size permitted for
–
Automatic: sets the MTU (Maximum Transmission
Unit at 1500).
–
Automatic by DHCP: sets the MTU according to the
DHCP connection.
–
Manual: allows you to manually set the MTU.
•
HW Switch Ports - displays the status of each LAN port.
3.
Click Apply to save the changes.
5.4/
BROaDBaND CONNECTION
(EtHERnEt/Coax)
You can view the properties of your broadband connection (your
connection to the internet). This connection may be via either
Ethernet or Coaxial cable.
To view the connection settings:
1.
In the Network Connections page, click the Broadband
Connection (Ethernet/Coax) or Coax link.