Static Wan With Lan Ipv6 Stateless Settings - Verizon Wireless G3100 User Manual

• LAN Prefix (automatically populated)
• Guest Wi-Fi Prefix (automatically populated)
• IPv6 LAN Address (automatically populated)
• Guest Wi-Fi IPv6 LAN Address (automatically populated)
• DHCPv6 Client Address Range (start and end)
• LAN Link Local Address (automatically populated)
• Guest Wi-Fi Link Local Address (automatically populated)
• Subnet ID - set the site topology for your internal site
• Router Advertisement Lifetime (minutes between 0-150)
• IPv6 Address Lifetime (minutes between 3-150)
3. After entering all appropriate IPv6 settings, click Apply to
have changes take effect.

Static WaN with LaN IPv6 Stateless Settings

1. To configure IPv6 LAN Stateless mode with Static WAN,
select the Stateless option on the IPv6 Configuration Control
page as shown below:
verizonwireless.com | ©2019 Verizon Wireless. All Rights Reserved.
08 / CONFIGURING
ADVANCED SETTINGS
128