Mac Authentication; To Set Wireless Mac Authentication - Verizon Wireless G3100 User Manual

3. When all changes are complete, click Save Changes to save
the changes.
3.3b/

MaC aUTHENTICaTION

You can configure your router to limit access to your wireless
network allowing access only to those devices with specific MAC
addresses.

To set wireless MAC authentication:

1. To enable access control, select the Enable Access List
check box.
2. Select either:
• Accept all devices listed below – allows only the listed
devices to access the wireless network.
Warning: This will block wireless network access for all devices
not in the list. Only devices in the list will be able to connect to
the wireless network.
• Deny all devices listed below – denies access to the listed
devices. All other wireless devices will be able to access
the wireless network if they use the correct wireless
password.
3. Enter the MAC address of a device, then click the Add
button.
4. Repeat step 2 and step 3 to add additional devices, as
needed.
verizonwireless.com | ©2019 Verizon Wireless. All Rights Reserved.
03 / WIRELESS
SETTINGS
44