Advertisement
The BR-EN900 encoding (HEVC and H.264) Start/Stop is controlled in the Actions section of the GUI.
In order to make any changes to encoding parameters, each channel must be stopped and restarted
after changes are applied. To automatically start encoding upon power ON, save Configuration and
enable the Auto Start. Configuration captures the current status of the encoder with all associated
settings, so channels must be running prior to saving the Configuration.
Saved Configuration
Streaming to Zixi Server.
Zixi streaming protocol features the most resilient video transport over the
Internet and is highly recommended for sending live video over WANs.
Channel Name and Password should match the Zixi server settings.
Zixi Server Input ID
Zixi Server IP Address
UDP Packet Size consideration:
Each data transfer protocol encapsulation increases the packet size.
When packet size exceeds the MTU, it will be fragmented.
Some ISPs reject fragmented packets due to security concerns.
Rejected packets = lost packets, video may become corrupted.
When using Zixi or Pro-MPEG protocols, streaming via Bonded LTE
(or other VPN) it is recommended to reduce the UDP Packet Size to 1128.
Full version of User Manual is located in the Help section or at pro.jvc.com
Start / Stop encoding
Zixi Server Input ID Password
Latency value affects the efficiency of error
correction and should be selected based on the
quality of the Internet connection.
FEC – Forward Error Correction
ARQ – Automatic Repeat Request
Preset Latency (ms)
100 - 1,499
1,500 - 8,000
Auto Start enabled
Error Correction
Overhead
FEC + ARQ
up to 30%
5%
ARQ only
Advertisement
