Advertisement
Quick Links
Advertisement
Related Manuals for Schlage HandPunch GT-400
Summary of Contents for Schlage HandPunch GT-400
- Page 1 FlexClock ® ® GT-400 uncH Hand Geometry Time Clock Setup Guide...
-
Page 2: Additional Questions
setup AdditionAl Questions USE CAUTION when making connections to the back board to avoid damage. If you have any additional questions regarding the installation or use of your Be aware of possible damage due to electrostatic discharge (ESD). ESD is of particular concern when working on carpeted surfaces and in dry environments. -
Page 3: Network Setup
network setup Your FlexClock automatically sets itself up on your network, as long as your network supports this capability. Most small business networks do. If your network requires a manual or “static” configuration, your company’s IT department should be able to tell you whether you need to set up a “Static IP address”. -
Page 4: Troubleshooting
CloCking in & out troublesHooting Clocking in and out is simple: Press 1 to clock in. Press 2 to clock out. troubleshooting network Connection After you press 1 or 2, enter your PIN number and then place your hand on You can always force the time clock to attempt to contact its server at any time the reader. - Page 5 About HAnd geoMetry enrolling HAnds Hand geometry is a form of biometry that identifies users by the shape of their To enroll a hand, press 1 from the Enrollment Menu. hands. Hand geometry readers measure a user’s hand along many dimensions First, you’ll be asked to enter the PIN number for the employee.
-
Page 6: Test Mode
test Mode setting MAnAger HAnd teMplAtes On the enrollment menu, option 7 (Tests) allows you to test the hand From the enrollment menu, you can also set up to four (4) manager hands. This geometry reader without punching anybody in or out. lets you give employees access to the manager menu.