Table of Contents
Advertisement
Available languages
Available languages
Troubleshooting
Problem
While Core Drilling,
the Core Drill has
locked/jammed in the
Material
Rotary Hammer is
uncomfortable to use
due to Vibration
Tool will not start
Troubleshooting
Possible Cause
Excessive Pressure
on Tool at the point of
Breakthrough in the
Material
Hammer Mode is on
Core Drill is not
suitable for Drill
Large build-up of
Debris inside Core
Drill while Operating
Tool is being used for
too long
Trigger Switch faulty
Faulty Motor
39
Solution
Reduce Pressure
before Breakthrough
Ensure Hammer
Mode is off to prevent
Damage to Cutting
Teeth and reduce
Possibility of
Jamming
Ensure the Core Drill
max. Speed and
Diameter are
compatible with the
Rotary Hammer
Regularly empty this
Build-up of Debris to
ensure safe Opera-
tion
Take frequent Breaks
and read the Sections
in this Manual regard-
ing vibration
Contact the Westfalia
Customer Service
Contact the Westfalia
Customer Service
Advertisement
Table of Contents
