Sharp SX-51A7 Operation Manual page 17

Reset Button
( a )
l
When the Reset button is pressed in the
Teletext mode, previously set Teletext
functions except the page number memory
will be reset and an ordinary TV
programme will apear while the Teletext
decoder is set up to display the initial
position (the page number stored in the red
block) of a Teletext broadcast.
Hold Button
( m )
l
Any Teletext page can be held on the
screen by pressing the Hold button when
watching a Teletext broadcast. Press the
button again to cancel the hold mode.
Index Button
( a )
l
Used to recall the page number you stored
yourself.
When this button is pressed, the page
number stored in the red block will be
displayed on the screen.
Colour Button (l----I)
(Red, Green, Yellow, Blue)
l
When any of these colour buttons is
pressed, the block will move to the position
that corresponds to the pressed button,
where you can input the page number you
want to store. (See store button).
l
When each colour button is pressed after
storing your desired page number, each
stored Teletext page number will be
displayed on the screen.
Text Page Selector (V/A)
l
These buttons allow sequential selection of
16