Advertisement
7- MIDI
TherapSid can transmit and receive MIDI. A li]le dot at the right of the first LED
digit indicates incoming MIDI, a dot at the right of the second LED digit indicates
outgoing MIDI
7- 1 MIDI Channel SelecDon
TherapSid can receive and send MIDI on the channel of your choice.
You can individually change the input and output channels at any Dme by
following these steps:
-To select MIDI input channel: Hold Arp Mode and press Preset Up
Now the input channel is displayed on the led display.
Change the MIDI input channel (1-16) with the Preset Up/Down bu]ons
When done, confirm with a final press of the Arp Mode bu]on. Display goes blank
and the channel is saved to EEPROM
-To select MIDI output channel: Hold Arp Mode and press Preset Down
Now the output channel is displayed on the led display.
Change the MIDI output channel (1-16) with the Preset Up/Down bu]ons
When done, confirm with a final press of the Arp Mode bu]on. Display goes blank
and the channel is saved to EEPROM
7- 2 Triggering Voices Separately
If MIDI channel input is set to 1 you can trigger voices 1 2 and 3 individually on
MIDI channels 2, 3 and 4 respecDvely. When the input is set to another channel
therapSid on responds to that channel.
12
of 18
Advertisement
