Installing Other Accessories - Yueming MF20 Product Manual

Self-locking illuminated button (galvanometer) is mounted in the third hole on the control
panel. When you press this button, the galvanometer powers on, the built-in LED turns to
red, and the scanning lens automatically returns to zero.

To examine the galvanometer or check the scanning lens surface, turn
off this button.
Prompt

Self-locking illuminated button (laser)
Self-locking illuminated button (laser) is mounted in the fourth hole on the control panel.
When you press this button, the laser powers on, the built-in LED turns to red, and the
internal cooling fan of the laser starts working.

When the laser powers on, wait 7-8 seconds to let the laser initialize.

After power on, the laser is in emission ready state. Be careful to avoid
emission due to misuse and result in personal injury and product
Prompt
damage

3.2.1 Installing Other Accessories

Some models also come with other accessories and should be installed by our customer
service personnel. In addition, the optional scanner, printer and other equipment should be
installed by the customer.
27