Satel STAM-IRS Manual

STAM-IRS is a dedicated server to be used with the STAM-2 monitoring station which
enables receiving transmissions sent via telephone line, Ethernet network (TCP/IP) or GSM
network (SMS and CLIP).
Note: The STAM-2 monitoring station must be registered within 31 days of the server
program installation. After expiry of this period of time, the server program will stop
working. You can perform the registration either on the www.stam2.satel.pl web page
or by using the form included in the delivery set. Fax the completed form to the
number (+48) 58 320 94 01. After registration, SATEL will send you a license file to
your e-mail address or to the home/business address (by regular mail), as indicated in
the form. Having installed the license file, you will be able to use the server program
without any time limit.

1. Features

 Energy-efficient INTEL ATOM platform, functioning as a data server and ensuring
communication with the event receiver cards.
 Support for up to 17 event receivers:
 up to 14 cards (telephone or Ethernet), installed in PCI slots;
 up to 3 GSM modules, connected to COM ports.
 2 low-power SSD drives.
 7'' LCD display to facilitate local management of the server.
 Installed WINDOWS 7 Embedded operating system.
 Installed and properly configured STAM-2 program.
 Capability to restore the whole system (including factory configuration of the STAM-2
program) from a backup copy.
 Cyclically saving copies of data.
 Enclosure enabling installation in 19" rack cabinets.
 Possibility of connecting a monitor via the DVI standard interface.
 Built-in 13.8 V DC buffer power supply, 7 A output current, with support for external 12 V
backup battery.
 Power supply short-circuit and overload protection.
 Monitoring power supply status and reporting troubles.

2. Description

Note: The type of base receiver card – either telephone or Ethernet – is chosen by the
Customer during purchase.
INTEGRATED MONITORING
RECEIVER WITH MICRO SERVER
®
STAM-IRS
stam-irs_en 04/13