Tenda F6 Quick Installation Manual page 2

LED indicators/Ports and Buttons
LED indicator
WiFi/RST LAN3 LAN2 LAN1 WAN
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
This equipment should be installed and operated with a minimum distance
20cm between the device and your body.
The mains plug is used as disconnect device, the disconnect device shall
remain readily operable.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. (2) To avoid
unnecessary radiation interference, it is recommended to use a shielded
RJ45 cable.
WARNING: The mains plug is used as disconnect device; the disconnect device
shall remain readily operable.
Declaration of Conformity
Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the radio
equipment type F6 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: http://www.tendacn.com/en/service/download-cata-101.html
Operating Frequency: EU/2412-2472MHz (CH1-CH13)
EIRP Power (Max.): 19 dBm
Software Version: V03.03.01.20_multi
Caution:
Adapter Model: BN049-A05009E
Manufacture: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD.
Input: 100-240V AC, 50/60Hz 0.3A
Output: 9V DC, 0.6A
: DC Voltage
LED indicator Status
Solid on
LED
Slow blinking
indicator
Fast blinking for
3 seconds
Button/Port
PWR Used to connect to the included power adapter.
WAN Used to connect this router to the internet.
LAN1
LAN2 Used to connect to wired devices such as computers or switches.
LAN3
WiFi on/off button and reset button.
- Hold the button down for 1~3 seconds to turn on or off the WiFi
WiFi/RST network of the router.
PWR
- Hold the button down for about 8 seconds, then release when
the LED indicator blinks fast. The router is reset successfully.
RECYCLING
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE). This means that this product must be handled
pursuant to European directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization
or to the retailer when he buys a new electrical or electronic equipment.
Operating Temperature: 0 °C - 40 °C
Operating Humidity: (10% - 90%) RH, non-condensing
Description


The router is starting or connected to the internet
successfully.
The router fails to connect to the internet.
A wired device is connected or disconnected to
the router.
Description
FAQ
Q1:
What
should
I
do
if
I
cannot
log
in
to
the
web
UI
of
the










router
by
entering
192.168.0.1
or
tendawifi.com?
A1: Try the following methods:
Ensure that the connection between the router and your device is correct.
- Ensure that your computer is connected to LAN1, LAN2 or LAN3 port
properly, and the computer is set to obtain an IP address automatically.
- Ensure that your WiFi-enabled device is connected to the WiFi network of
the router.
Clear the cache of your web browser or replace one.
Use another computer.
Reset the router and log in again
Q2: What should I do if I cannot access the internet after configuring
internet settings?
A2: Try the following methods:
Check if the WAN port of the router is connected properly.
If the LED indicator blinks slowly, login to the web UI of the router,
navigate to Internet Settings, and follow the on-screen instructions
to solve it.
If your wired devices cannot access the internet:
- Check whether your computer is connected to LAN1, LAN2 or LAN3
port properly.
- Check whether your computer is set to obtain an IP address
automatically.
If your WiFi-enabled devices cannot access the internet:
- Check if your WiFi-enabled devices is connected to the WiFi network
of the router with the SSID you set;
- Change your WiFi name and WiFi password. Then try connecting
your WiFi-enabled devices again.
Contact your ISP for help.
Q3: How to change my WiFi name andWiFi password?
A3: Log in to the web UI of the router, and modify them on Wireless
Settings > WiFi Name and Password page.
Q4: How to reset the router?
A4: Try the following methods:
When the LED indicator is blinking, hold down the WiFi/RST button
for about 8 seconds, then release when the LED indicator blinks fast.
The router is reset successfully.
Log in to the web UI of the router, enter the Administration page >
Device Management page, click the Reset button and follow the
on-screen instructions to reset it.
Copyright
© 2019 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
Tenda is a registered trademark legally held by Shenzhen Tenda Technology
Co., Ltd. Other brand and product names mentioned herein are trademarks
or registered trademarks of their respective holders. Specifications are
subject to change without notice.
Technical Support
Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, NO.1001, Zhongshanyuan Road, Nanshan District,
Shenzhen, China. 518052
USA hotline: 1-800-570-5892
Toll Free: Daily-9am to 6pm PST
Canada hotline: 1-888-998-8966
Toll Free: Mon - Fri 9 am - 6 pm PST
HongKong Hotline: 00852-81931998
Global Hotline: +86 755-2765 7180 (China Time Zone)
Website: http://www.tendacn.com
E-mail: support@tenda.com.cn