Advertisement
Quick Links
Advertisement
Related Manuals for Echo Megaloop
Summary of Contents for Echo Megaloop
- Page 1 Product Code: 901-1010-01...
- Page 2 4. Installation Instructions continued 5. Installation Instructions continued 6. Connection Solutions 7. Connection Solutions continued 8. IMPORTANT 9. Replacement Parts & Technical Specifications Echo Megaloop Aid for Living Inductive Loop Amplifier Please read and follow the safety instructions before using the product...
- Page 3 Please follow the step-bystep instructions carefully! ● Do not use in an environment that is damp, wet, very hot or very cold. ● To clean the Megaloop and its accessories, use only a soft cloth and an inorganic cleaner.
- Page 4 Accessories Picture: Megaloop Amplifier Mains Power Adapter Loop wire Clips Microphone SCART plug Phono Phono Lead...
-
Page 5: Installation Instructions
If the SCART connection is not successful, connect the microphone. Simply plug the3.5 mm jack on the microphone lead into the microphone socket on the MegaLoop fig 2(12) and fix the microphone onto the TV speaker using the Velcro fig 4. - Page 6 8. How to test your installation: Make sure the Background Noise Control is at “N” position (1), speak into the microphone connected to (12) in a normal voice, turn the Volume Control knob up (2) and when the Red light (5) starts to flash you know that your system is working.
- Page 7 Figure 3 Figure 4...
- Page 8 Help and advice for connecting to TV with analogue audio output. When connecting a MegaLoop, EchoLink or RadioLink to a TV. It is usually best not to use the SCART sockets as this can result in picking up the wrong sound or sound that is out of sync with the picture.
- Page 9 The picture below shows the front and rear of a typical Digital to Analogue converter. Set up is easy the converter is connected from the TV to the (in) socket on the converter and the MegaLoop, EchoLink, or other analogue device is then connected to the phono out sockets.
- Page 10 NeckLoop can be connected. Always turn volume control (2) fully anti-clockwise to “Low” position before connecting any headphones or Echo neck loop, then adjust upwards to a comfortable sound level. If you do not follow these instructions you could damage your hearing! Remember to turn your hearing aid to the ‘T’...
-
Page 11: Replacement Parts
Replacement Parts: Code Item 2001 MegaLoop Amplifier only 202/M Microphone on lead, with clip and Velcro 570-1010-01 Mains Power Adapter Loop Wire 38m Clips (50 off) 201/B SCART plug 306/B Phono/Phono lead Technical Specifications: Power Supply: 12V DC, min. 1.5amp Output Positive + Centre Output current >... - Page 12 Hearing Products International Limited declares that the Echo MegaLoop™ complies with all relevant EU directives.The full EU declaration of conformance for the Echo MegaLoop™ is available from Hearing Products International Ltd. Hearing Products International Limited Echo House, 26/27 Haigh Park, Stockport, SK4 1QR, England Tel.