Related Manuals for System Equine Horse Stock Series
Summary of Contents for System Equine Horse Stock Series
- Page 2 Horse Stock Series Instructions 1. With helper, stand end frames on its side on floor with the tabs facing outwards 2. Slide top cross beam support on floor into end frames 3. Locate end frame with holes near top (this is the front of the horse stock) 4.
- Page 3 5. Hand assemble the top cross beam supports to back of frame with ½” x3” bolts 6. Repeat step 4 and 5 but on the top side of the stock 7. With helper stand Horse Stock up...
- Page 4 8. Locate sides of stock and attach to desired height with pins provided (ensure butt bar holes are toward the back)
- Page 5 9. Attach butt bar with ½” x 3 ½” bolts provided 10. Put doors on using 5/8” bolts provided...
- Page 7 11. Cut a piece of wood to 32” to wedge inside of stock between the legs 12. Tighten up all bolts firmly 13. Using wedge anchors lag Horse Stock to the floor...
Need help?
Do you have a question about the Horse Stock Series and is the answer not in the manual?
Questions and answers