Kon-Tiki Towing Capabilities - Swift Edge 412 Standard Technical Handbook

Kon-Tiki Towing Capabilities

Kon-Tiki Towing Capabilities
Model
Kon-Tiki 625 (L)
†
Kon-Tiki 625 (H)
†
Kon-Tiki 635 (L)
†
Kon-Tiki 635 (H)
†
Kon-Tiki 649 (H)
Kon-Tiki 650 (L)
Kon-Tiki 650 (H)
Kon-Tiki 675 (L)
Kon-Tiki 675 (H)
CAUTION: When fitting a towbar, it must meet certain minimum requirements as specified by
Type Approval Regulations. The bar will have marked on it the approval standard
(94/20/EC or 55R ECE) and the maximum download, or noseweight, that it can accept.
It must fit the manufacturer's approved mounting points and must not obscure the
towing vehicle's number plate.
# The maximum trailer weight is limited by the Gross Train Weight
which must not be exceeded. For example, if the vehicle is at the
maximum MTPLM of 5000kg, then the maximum trailer weight
possible is 1000kg. Reducing the weight of the vehicle by removing
payload, will allow you to increase the trailer weight up to a maximum
of 1600kg.
To ensure adequate road holding, the load on the front axle, under all
conditions, must not be less than 40% or more than 70% of the total
weight.
Care must be taken when distributing loads. The loadings and
weights above are maximums and must not be exceeded under any
circumstances.
† Maximum trailer nose weight limited to 40kg
95
MTPLM
4250kg
4250kg
4250kg
4250kg
5000kg
5000kg
5000kg
5000kg
5000kg
Permissible Front Axle Load
2100kg
2100kg
2100kg
2100kg
2100kg
2100kg
2100kg
2100kg
2100kg