Using The Vacuum Cleaner - Promac VAC-20PC User Manual

4. USING THE VACUUM CLEANER

Read chapter 1 – IMPORTANT SAFETY INSTRUCTIONS of this manual thoroughly before setting up and
using this vacuum cleaner.
4.1 WORKING WITH DUST BAGS
If sucking up dry dust an optional dust bag can be used to collect the dust and
ease the disposal. To insert the dust bag take off the head (see also figure 3).
Insert the dustbag like shown on figure 6. Put on the head again and secure
the head with the clamps.
4.2 DRY OR WET FLOOR SUCTION
FIG. 7
4.3 VACUUMING - INSERTING AND REMOVING
THE HOSE
To vacuum insert the hose (A) into the suction inlet (B).
FIG. 9
7
To suck up dry dust and debris use the dry floor
nozzle (A) with the bristles rim.
To suck up wet debris replace the brush rim with
a screwdriver and insert the rubber squeegees
FIG. 8
4.4 BLOWING - INSERTING AND REMOVING THE
HOSE
The machine can also be used for blowing. In some cases it is
easier first to blow the debris away and then afterwards
collect it.
To use the blow function insert the hose into the blow outlet
(A) in the same way for the suction inlet. See above. The
blowing can be controlled by the lever (B)
FIG. 6
ENGLISH