Intended Use - Conrad Electronic ME-42 Operating Instructions Manual

Intended use of the
Digital Multimeter ME-42:
DC voltage measurement up to a maximum of 1000 VDC
AC voltage measurements up to 750 VAC rms max
Measurement of DC and AC current up to max. 20 A, for a max. of
30 s (protected)
Resistance measurement up to 40 MOhm max
Continuity testing and diode testing.
Measurements must not be performed under unfavourable ambient
conditions. Unfavourable ambient conditions include:
wetness or excessive humidity,
l
dust and combustible gases, fumes or solvents,
l
thunderstorms or storm conditions producing strong electrosta-
l
tic fields, etc.
Any use other than as described above can lead to damage to the
instrument; in addition this is accompanied by dangers such as
short circuit, fire, electric shock, etc. No part of the product must
be modified or converted! The safety instructions are to be follo-
wed without fail !