For your safety ...........6 Aufstellung und Inbetriebnahme Bedienelemente ............Setting up Anschlussfeld im Geräteboden ....... Setting up the ATMOS Chair 51 D ......7 Height and inclination adjustment of backrest ..7 Bedienung Adjusting the position of the backrest ....8 Einsetzen / Entfernen des Mounting the backrest...........9...
ATMOS Chair 51 D will be preserved. ● The product ATMOS Chair 51 D bears CE marking CE 0124 according to the EC Directive of the council for medical products 93/42/EEC and meets the basic requirements of Appendix I of this directive.
Pictures contained in this manual Warning, especial diligent Observe operating instructions Important information notice Symbols at the ATMOS Chair 51 D Serial number Order number Creation date The CE sign shows that this product meets the appropriate requirements of the...
1.5 Scope of supply ● Prior to dispatch, the ATMOS Chair 51 D was subjected to an extensive functional test and has been carefully packed. Nevertheless, please compare the contents of the shipment on completeness immediately upon receipt (see delivery note).
The warranty will be rendered invalid in case of damages caused due to the utilization of accessories or consumables which are not approved by ATMOS for use with this unit. ATMOS is not liable for personal injury and damage to ...
3.0 Setting up 3.1 Setting up the ATMOS Chair 51 D 1. Insert the gas compression spring including cover () into the star base (). 2. Attach the seating () to the gas compression spring (). 3. Fix the backrest cushion to the backrest.
3.0 Setting up Adjusting the position of the backrest The position of the backrest can be adjusted in height and inclination. In addition it is rotatable and can therefore be used as elbow rest ( , Fig 3). ...
3.0 Setting up Mounting the backrest centre Loosen the screws ( and , Fig 6). Attach the backrest to the relevant drillings and refi x the screws. The backrest is rotatable and can therefore be used as elbow rest as well. There are 3 mounting positions possible: right, centre, left.
4.2 Cleaning the unit's surfaces and upholstery ● The surfaces of the ATMOS Chair 51 D are resistant against all the recommended surface disinfectants stated in chapter 4.3 and 4.4. Nevertheless after any length of time discolourations could possibly develop.
Physical Medicine Device group 89INN Risk Class Description CHAIR, ADJUSTABLE, MECHANICAL Issue of the technical specifi cations: 29.06.2011 Inspection A regular and thouroughly cleaning and disinfection of the ATMOS Chair 51 D according to these operating instructions is taken for granted.
Need help?
Do you have a question about the 51 D and is the answer not in the manual?
Questions and answers