Manufacturer's Recycling and Energy Information
NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company's top
priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly
products, and always strive to help define and comply with the latest independent standards from agencies such as ISO
(International Organisation for Standardization) and TCO (Swedish Trades Union).
Disposing of your old NEC product
The aim of recycling is to gain an environmental benefit by means of re-use, upgrading, reconditioning or reclamation of
material. Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely
disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures
and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.
All required information concerning the disposal of the product and country-specific information on recycling facilities can be
found on our following websites:
https://www.nec-display-solutions.com/p/greenvision/en/greenvision.xhtml
https://www.necdisplay.com
Model: CB651Q-GLM310A-G / CB751Q-GLA210A-G / CB861Q-GLA410A-G
Test voltage: 115V/230V
mode
Normal Operation*
Energy Saving Mode*
(A key energy saving)
Energy Saving Mode*
(AUTO STANDBY)
Power Off
Note:
*1: Under system without any option,with factory settings.
*2: Short press power key,system will shut down backlight power.
*3: No signal input,system will shut down to standby mode.
Energy Saving
This monitor features an advanced energy saving capability. When a Display Power Management signal is sent to the monitor,
the Energy Saving mode is activated. The monitor enters a single Energy Saving mode.
For additional information visit:
https://www.necdisplay.com/
http://www.nec-display-solutions.com/
https://www.nec-display.com/global/index.html
For ErP requirement/For ErP (Network standby) requirement:
Settings -> Other settings -> Wake on LAN -> ON (Default OFF)
Power consumption: 2 W or less.
Time for power management function: 35 sec.
(Except for a condition that the monitor has plural signal inputs.)
Power consumption: 0.5 W or less
Time for power management function:5 min. (Default setting)
(Except for a condition that the monitor has plural signal inputs.)
(in USA).
Power consumption
159.7W/158.8W (CB651Q)
1
201.8W/200.1W (CB751Q)
361.6W/355.7 (CB861Q)
*
19.0W/18.8W (CB651Q)
1,
2
24.2W/24.1W (CB751Q)
19.1W/18.9W (CB861Q)
*
Less than 0.5W
1,
3
Less than 0.5W
(in USA)
(in Europe)
(Global)
(in Europe),
English-72
LED color
Blue
Red and blue alternation
Red
Red
Need help?
Do you have a question about the MultiSync CB651Q and is the answer not in the manual?