Camera Setting - Speco DVR-4CF User Manual

8.3.1 CAMERA SETTING

1. Cursor (>) position indicates the current function selected.
2. Press《←》and《→》button to move the cursor to the desired item.
3. Press《ENTER》button to make changes.
4. Press《MENU》button to exit "CAMERA SETUP" selection.
5. CAMERA SELECT: Press《ENTER》button to select the desired channel.
6. RECORD ENABLE: Press《ENTER》button to switch the channel recording ON/ OFF.
7. MOTION DETECTION: Press《ENTER》button to switch the motion detection
function ON/ OFF.
8. MOTION SENSITIVITY: Press 《ENTER》 button to setup the motion sensitivity
rate (5 sensitivity rate values, 01 most sensitive).
9. HUE: Press 《ENTER》 button to adjust the color of cameras (15 color adjustment
values, default value: 08 ).
10. CONTRAST: Press 《ENTER》 button to adjust the camera contrast (15 contrast adjustment
values, default value: 08).
11. BRIGHTNESS: Press《ENTER》button to adjust camera brightness (15 color adjustment
values, default value: 08 ).
CAMERA SEUP
> CAMERA SELECT
RECORD ENABLE
MOTION DETECTION
MOTION SENSITIVITY
HUE
CONTRAST
BRIGHTNESS
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
22
■■■
CH1
ON
ON
03
08
08
08
DVR-4CF