Firmware Upgrade - Meizu M813H User Manual

Firmware Upgrade

How to upgrade the firmware
1. Use the USB cable to connect the Meizu M813H with a computer, and copy
the new firmware (update.bin) to the M813H root director；
2. Safely unplug the USB and turn off the Meizu M813H
Note: Please make sure the phone has sufficient battery, or it might be unable to upgrade or
boot due to power failure.
3. Start the phone while simultaneously holding the "Power" button
and "Volume Up" button (as pictured). and "Volume Up" button (as pictured).
4. Wait until the "System Upgrade" appears on the screen.
5. Tap the "Start" icon to begin the upgrade process or tap the "Cancel" icon
to exit upgrade mode.
If data erasing is needed, please check "Clear Data" option before upgrading.
Only the phone data (such as notes, messages, contacts) will be removed.
Data on the SD card (such as music and photos) will remain intact.
6. Do not power off the device while upgrading.
7. When the upgrade is complete, M813H will automatically reboot.
* To download the latest firmware, software and drivers; please visit
https://www.meizu.com/ru
Note: Emails are not backed up on Flyme. When clearing data, users will lose all users' emails.
Users can also upgrade the firmware by system-provided upgrade function; more details
please go to "Settings" > "About phone".
Note: Please use only firmware that is approved by Meizu, or the phone might be exposed to
phone breakdown, file missing, password compromising, and etc. All losses and risks due
to this reason shall be assumed by the users.
Note: Firmware flashing between A and G version is not supported. For your phone
and data security, if your phone comes with G version firmware (Check your version
in Settings > About phone > Build number), you can only flash firmware of G version
such as Flyme 7.1.1.0G.
Getting Started 15