Safe Removal Of Disk; Network Connection - Meizu M813H User Manual

Safe Removal of Disk

With an active USB connection, files can be copied between the M813H and
the computer.
1. After connecting M813H to the computer, open "Removable Disk";
2. Copy the selected audios, videos, pictures and other files to the
computer ;
3. After saving the files, click the
4. Click on the below message when it appears;
5. "Safety Remove Hardware" window will be displayed.
6. Confirm by clicking the "OK" button and then unplug the USB.
To keep users' data safe and the disk free from damage a removable disk , always
safely disconnect users' hardware from users' computer.

Network Connection

Note: Make sure the SIM card has been inserted into the M813H.
Setting up data connectivity
With just a few simple steps, users can unlock the M813H's data networking
capabilities which gives users connectivity with the world anytime, anywhere.
1. After starting the phone: go to "Settings" > "SIMs & Networks" and activate the
"Cellular data" switch.
2. Select users' carrier or operator under "Network carrier".
3. Under "Network mode", select , "2G only" or "3G preferred"or "4G preferred"
4. Tap the Back key
Note: When data connectivity is not needed, it is recommended to deactivate the "Enable data" switch.
Note: Before using the network , please confirm users' data consuming status or use WLAN whenever
possible to avoid exceeding users' data package plan.
icon on the computer taskbar ;
to complete the setup.
Basic Operations 20