Firmware Upgrade - Meizu M462 User Manual

Firmware Upgrade

How to upgrade the firmware
1. Use the USB cable to connect the Meizu M462 with a computer, and copy
the new firmware (update.bin) to the M462 root director；
2. Safely unplug the USB and turn off the Meizu M461.
Note: Please make sure the phone has sufficient battery, or it might be unable to upgrade or
boot due to power failure.
3. Start the phone while simultaneously holding the "Power" button
and "Volume Up" button (as pictured).
4. Wait until the "System Upgrade" appears on the screen.
5. Tap the "Start" icon to begin the upgrade process or tap the "Cancel" icon
to exit upgrade mode.
If data erasing is needed, please check "Clear Data" option before upgrading.
Only the phone data (such as notes, messages, contacts) will be removed.
Data on the SD card (such as music and photos)
will remain intact.
6. Do not power off the device while upgrading.
7. When the upgrade is complete, M462 will automatically reboot.
* To download the latest firmware, software and drivers; please visit
http://www.meizu.com
Note: Emails are not backed up on Flyme. When clearing data, users will lose all users' emails.
users can also upgrade the firmware by system-provided upgrade function; more details
please go to "Settings" > "About phone".
Note：Please use only firmware that is approved by Meizu, or the phone might be exposed to
phone breakdown, file missing, password compromising, and etc. All losses and risks
due to this reason shall be assumed by the users.
Getting Started 14