MS Sedco 59-W Technical Data

PRESS
TO OPERATE
DOOR
#59-H (Blue Powder Coat with White Paint
Filled Legend)
PRESS
TO
OPERATE
DOOR
#59-P (Stainless Steel with Black Paint
Filled Legend)
PRESS
TO OPERATE
DOOR
#59-HSS (Stainless Steel with Blue Paint
Filled Legend)
#59-W (Blue Powder Coat with White
Paint Filled Legend)
#59-WSS (Stainless Steel with Blue Paint
Filled Legend)
NOT SHOWN
#59-Plain (Stainless Steel with No
Legend)
8701 Castle Park Drive Indianapolis, Indiana 46256
Product Name
59 Series
4 1/2" Square Push Plate Switches
Manufacturer
MS SEDCO
8701 Castle Park Drive
Indianapolis, IN 46256
Phone: (800) 842-2545
www.mssedco.com
Product Description
BASIC USE
The 59 Series push plate switches
are designed to provide reliable
activation of any automatic door.
The 59 Series features 4" square
face plates in either stainless
steel or blue powder coated alumi-
num with etched and paint filled
legends. A 4 1/2" square formed
stainless steel back plate elimi-
nates possible wall damage from
standard use.
Designed as a universal switch,
the 59 Series fit single-gang or
2-gang electrical boxes with no
adapters necessary.
mount box is also available.
Each unit is built utilizing heavy
gauge stainless steel, aircraft
quality rivets and screws, durable
finishes and the most reliable
microswitch in the industry.
Technical Data
• 4" x 4" All Active Face Plate
• 4 1/2" x 4 1/2" Formed
Stainless Steel Back Plate
• UL Listed "Cherry Switch", SPDT,
Mom., 15 Amp @ 125V AC
• Rubber "Bellows" Increases
Weather Protection (included)
Telephone: (800) 842-2545/(317) 842-2545
www.mssedco.com custsvc@mssedco.com
Push Plate Switches
• Fits single or 2-gang Electrical
Box or MS SEDCO #1015
Surface Mount Box
• Special Finishes: US3, US4,
US10, US10B, US32
• Radio Control Versions
Available
ClearPath™ Radio Control Switches
with HDRC™ solve problems caused
by interference and stray signals —
and are guaranteed to work where
others won't.
DIMENSIONS
See Reverse
APPLICABLE STANDARDS
American
Institute (ANSI) - Building Hard-
ware Manufacturers Association
(BHMA) - ANSI/BHMA A156.10 &
A156.19.
APPROVALS
UL (Micro-Switch)
Installation
A surface
The 59 Series Switch is easy to
install.
Hardwired Applications:
Mount to a standard single or
2-gang electrical box at the
desired wall location. Remove the
face plate from the switch assem-
bly. Connect the necessary signal
wires to the appropriate switch
contacts (COM & N.O. are stan-
dard). Secure the switch assem-
bly to the electrical box and
reattach the face plate.
Fax: (800) 849-3387/(317) 849-3387
59 Series
4 1/2" Square
ClearPath
™
National Standards
22006