MS Sedco 614 Series Installation Instructions

614 Series
Extreme Door Activator Switches
Section 1
General Description
The 614 series extreme door activator switches are
designed to provide reliable activation of any automatic
door in extreme environments. This 1" diameter button
switch is completely
indestructible. The face plates come in two sizes.
614-SS: 4 1/2" square face plate (fits single-gang
electrical box)
614-NSS: 1 11/16" x 4 1/2" face plate (fits 1 3/4"
door frame)
Section 2

Basic Installation

614-SS: 4 1/2" Square Face Plate
1) Mount a standard single-gang electrical box in its
intended location.
2) Connect the necessary signal wires to the switch
wires.
1" Diameter
Red Anodized Aluminum
Piezo Technology
3) Attach the switch assembly to the electrical box with
the 6-32 x 1" screws provided.
MAX TORQUE 4 inch.-lbs. DO NOT OVER TIGHTEN!
waterproof and virtually
COM
N.O.
7898 Zionsville Road  Indianapolis, Indiana 46268
Telephone: (317) 842-2545  www.mssedco.com  custsvc@mssedco.com
INSTALLATION INSTRUCTIONS
614-NSS: 1 11/16" x 4 1/2" Face Plate
1) Make the required cutout in the door frame.
1 1/8"
C/ L
2) Connect the necessary signal wires to the switch
wires.
1" Diameter
Red Anodized Aluminum
Piezo Technology
3) Attach the switch assembly in the cutout prepared in
step 1 with the 6-32 x 1" screws provided.
MAX TORQUE 4 inch.-lbs. DO NOT OVER TIGHTEN!
FACE PLATE
3 1/4"
DRILL & TAP 6-32
(2 Places)
COM
N.O.
1 3/4"
DOOR FRAME
Page 1
(/MANU) 614v1217