Related Manuals for Plasma Air 200 Series
Summary of Contents for Plasma Air 200 Series
- Page 1 INSTALLATION, OPERATION & MAINTENANCE MANUAL Plasma Air 200 SERIES (MODELS 201D, 201E, 202D, 202E) REV 07/2019 www.plasma-air.com...
- Page 2 INTRODUCTION The Plasma Air 200 Series ion generator is a two-tube commercial quality unit intended for installation in air handling units (AHU), furnaces, or duct systems for residential and commercial applications. This ionization equipment is effective in reducing harmful pollutants and odors by introducing positive and negative ions into the system.
- Page 3 UL label. The 200 Series draws up to 16 watts. The power source should not be protected by a breaker exceeding 20 amps. The unit should be powered when the system supply fan is energized. This can be accomplished by any of the following methods: •...
-
Page 4: Troubleshooting
Depending on the severity of the pollutant, the upstream filtration and the maintenance schedule, the tubes are rated for 17,600 hours of service and should be replaced at that interval. Contact your local Plasma Air Distributor to purchase replacement tubes, www.plasma-air.com.
Need help?
Do you have a question about the 200 Series and is the answer not in the manual?
Questions and answers