Plasma Air 50 Series Installation, Operation & Maintenance Manual

Plasma Air 50 Series Installation, Operation & Maintenance Manual

Air ion generators

Advertisement

INSTALLATION, OPERATION
& MAINTENANCE MANUAL
PLASMA AIR
MODEL 50 SERIES
(MODELS 51E, 51F, 52E, 52F)
REV 02/2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 50 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Plasma Air 50 Series

  • Page 1 INSTALLATION, OPERATION & MAINTENANCE MANUAL PLASMA AIR MODEL 50 SERIES (MODELS 51E, 51F, 52E, 52F) REV 02/2018...
  • Page 2 INTRODUCTION Plasma Air models 51E, 51F, 52E, and 52F air ion generators are 5 tube industrial quality units intended for installation in air handling units or in duct systems for commercial and industrial facilities. This ionization equipment is effective in reducing harmful pollutants and odors by introducing positive and negative ions in the system airflow.
  • Page 3 Plug the completed assembly into the male fitting on the ionization unit and screw the Coupling Ring clockwise to join the two fittings. The Female Insert will only fit onto the male fitting one way. PLASMA AIR INTERNATIONAL 35 MELROSE PLACE STAMFORD, CT 06902 203-662-0800 info@plasma-air.com www.plasma-air.com...
  • Page 4: Troubleshooting

    Depending on the severity of the pollutant, the upstream filtration and the maintenance schedule, the tubes are rated for 17,600 hours of service and should be replaced at that interval. Contact your local Plasma Air Distributor/Dealer to purchase replacement tubes when necessary, www.plasma-air.com.

This manual is also suitable for:

51e52e52f51f

Table of Contents