Table of Contents
Advertisement
5) Attach cable ends to hooks on top of end sections.
6) Attach braces between the beam and the base of
WARNING
each end section.
Tele-Tower Adjustable Work Platform without these
braces. Doing so can result in damage to the structure
which can lead to failure that can result in severe prop-
erty damage and or severe bodily injury or death.
Form 14-11-00-00 version 10
: NEVER operate the
7) Jog base of end sections to facilitate brace pin align-
ment. DO NOT hammer on braces.
8) For platform heights from 2' to 6', the deck may be
placed on lower rungs. For added safety use guard rails
even when deck is on lower rungs.
- 6 -
© 2019 Paragon Pro Manufacturing Solutions All Rights Reserved.
ASSEMBLY
continued
Advertisement
Table of Contents
