Table of Contents
Advertisement
ASSEMBLY
A
Tighten
Securely
1A) Place connecting beam in tapered socket and se-
cure with bolt and wing nut as shown.
1B) Lift retaining bolt and tighten wingnut until secure.
(Make sure that blade is secure in slot)
2) Engage ladder lock pins and lock one caster on end
Section "B". Allow casters on Section "A" to roll while
connecting to Section "B." Similarly secure as shown in
step 1. Secure with bolt and wing nut.
Form 14-11-00-00 version 10
B
NOTE: When disassembling, loosen
wing nut and pivot latch bolt assem-
bly to pry tapered socket open.
3) Rotate winch handle counterclockwise and release
cable from storage on beam.
4) Place cable under sheave at lower end of each tele-
scoping ladder section.
- 5 -
© 2019 Paragon Pro Manufacturing Solutions All Rights Reserved.
Advertisement
Table of Contents
